Need help?Do you have a question about the Dormakaba ED and is the answer not in the manual?
General| Output Voltage | 230 VAC |
|---|---|
| Frequency | 50/60 Hz |
| Backup Time | 5-10 minutes (depending on load) |
| Operating Temperature | 0-40°C |
| Dimensions | 300 x 101 x 142 mm |
| Weight | 4.3 kg |
Describes the mounting, connection, and commissioning of the ED UPS.
Specifies that only qualified electricians may mount and commission the product.
Lists related documents such as operation manuals for ED 100/250.
Defines key terms and abbreviations like ED 100/250, UPS, ED-AMP, and ED-RBI.
Explains the hazard categories DANGER, WARNING, and NOTICE and their implications.
Details symbols for application tips, cross-references, and action steps within the manual.
Defines the necessary qualifications and capabilities for electricians.
Describes the purpose of the ED UPS for maintaining ED 100/250 operation during power failures.
Lists conditions and specific uses that are not permitted for the product.
Lists article numbers and descriptions for available components and spare parts.
Provides key technical specifications including voltage, capacity, temperature ranges, and weight.
Explains the function of the LEDs and provides a table of error codes, fixes, and acknowledgments.
Important notices regarding cable routing and SPV mode for double-leaf units.
Details the mounting plate alignment and screw-on points for the ED UPS.
Step-by-step instructions for dismantling the ED 100/250 and mounting the ED UPS.
Detailed steps for connecting the ED-AMP board to the ED 100/250.
Instructions for connecting the ED-RBI board for double-leaf configurations.
Warning regarding risk of injury due to technical errors and electric shock.
Notice regarding property damages due to incorrect spare parts.
Step-by-step guide for safely replacing the A01 battery.
Instructions for the environmentally friendly disposal of used batteries.
To Next Page
