Instruction Manual Dräger MSI EM200-E
13
8.2 Data Menu
If "Memory" has been selected, the display reads:
With pushing "H" (
ESC
) you may skip back to "Selection of Functions" (see 4.).
With pushing "
▲
or
▼
" (
▲▼
)
you may mark the wanted function.
With "F" (
START
) you may call the marked function.
Selectable functions are:
Info = Calls info function of the data menu (see 8.3)
Show: last = Show last stored data record (see 8.4)
Show: first = Show first stored data record (see 8.4)
Clear data memory = Deletes all stored data records (see 8.5)
Table settings = Selection of table type (see 8.6)
8.3 Info Function of Data Menu
If "Info" has been selected, the display reads e.g.:
The display informs about the number of possible data records, the number of stored engine
and measurement records and the date and time of the first and the last storing.
With "H" (
END
) you finish the "Info Function" and skip back to "Data Menu" (see 8.2).
To Next Page
Loading...
