Instruction Manual Dräger MSI EM200-E
14
8.4 Show Stored Data Records
If "Show: first" or "Show: last" has been called, the stored data records are displayed. In the
first case the first data record is marked, in the other case the last one is marked.
Are no records stored the display reads:
Are records stored the display reads e.g.:
The head line informs you about the number of the marked record and the number of stored
records. The table informs you about the type of measurement and the engine number or
date and time of storing (see 8.6).
With "H" (
ESC
) you may cancel this function and skip back to "Data Menu" (see 8.2.).
With pushing "
▲
or
▼
" (
▲▼
)
you may mark the wanted measurement.
With "F" (
SHOW
) you may display the result screen of this measurement.
To Next Page
Loading...
