Instruction Manual Dräger MSI EM200-E
21
11.1 Date and Time Adjust
If "Clock" has been selected, the display will read e.g.:
With pushing "▲ or ▼" (
+/-
)
you may modify the position marked with
+/-
.
With pushing "F" (
CONTINUE
) you may mark the next position.
With pushing "H" (
END
) the displayed date and time is accepted and you skip back to "Set-
tings" (see 11.).
11.2 Backlight Adjust
If "Adjust Backlight" has been selected, the display reads:
With pushing "
▲
or
▼
" (
+/-
) you may change the intensity of the backlight.
Selectable intensity levels are: 0 %, 25 %, 50 %, 75 % and 100 %
With pushing "H" (
END
) the shown intensity level is accepted and the menu "Settings" (see
11.) is shown again.
The selected intensity level remains held even after switch off.
To Next Page
Loading...
