Dräger EM200-E - 13. Technical Data; 13.1 General Technical Data; 13.2 Technical Data of Measured and Calculated Values

Instruction Manual Dräger MSI EM200-E
27
13. Technical Data
13.1 General Technical Data
General Technical Data
Humidity 10 - 90 % r.h. not condensing
Barometric pressure 800 … 1700 hPa
Operating temperature +5 °C ... + 40 °C
Storage temperature -20 °C ... + 50 °C
Dimensions ca. 165 mm x 195 mm x 75 mm
Weight ca. 1100 g
Approvals produced according to EN 50379 Part 1-3
Charger Wall power supply prim. 100 … 240 V; sec. 12 V; 0.8 A
Battery Internal NiMH Battery, 4.8 V 2000 mAh
Gas sampling Membrane pump for gas sampling
Gas conditioning Integrated, position independent, gas conditioning car-
tridge with condensate trap and particle filter
Interfaces USB as PC interface
Infrared for printer and PDA
Multiple function interface for accessory devices
Display Graphic display, adjustable illumination
13.2 Technical Data of Measured and Calculated Values
Measurement
Principle Range Resolution Accuracy
CO,
carbon monoxide
El.-chem.
sensor,
H
2
-compensated
0 ... 8,000 ppm 1 ppm 0.... 4,000 ppm:
< ± 20 ppm or
< ± 5 % of MV
NO,
nitrogen monoxide
El.-chem.
sensor
0 ... 2,000 ppm 1 ppm ± 5 ppm or
< 5 % of MV
NO2,
nitrogen dioxide
El.-chem.
sensor
0 ... 200 ppm 1 ppm ± 5 ppm or
< 5 % of MV
Air pressure Piezo-resistance 800 ... 1,700 hPa 1 hPa
MV = Measuring value