Dräger JM-103 - Page 24

DRAFT 20 June 2005
Page 2 - 14 Jaundice Meter Instructions for Use (MU01380)
Voltage
dips, short
interrup-
tions, and
voltage vari-
ations on
power sup-
ply input
lines—IEC
61000-4-11
< 5% U
T
(>
95% dip in
U
T
) for 0.5
cycles
40% U
T
(60% dip in
U
T
) for 5
cycles
70% U
T
(30% dip in
U
T
) for 25
cycles
< 5% U
T
(>
95% dip in
U
T
) for 5
seconds
< 5% U
T
(>
95% dip in
U
T
) for 0.5
cycles
40% U
T
(60% dip in
U
T
) for 5
cycles
70% U
T
(30% dip in
U
T
) for 25
cycles
< 5% U
T
(>
95% dip in
U
T
) for 5
seconds
Mains power quality
should be that of a typical
commercial or hospital
environment. If the user
of the unit requires con-
tinued operation during
power mains interrup-
tions, it is recommended
that the unit be powered
from an uninterruptable
power supply or battery.
Power fre-
quency
(50/60 Hz)
magnetic
field—IEC
61000-4-8
3 A/m 3 A/m The power frequency
magnetic fields should be
at levels characteristic of
a typical location in a typ-
ical commercial or hospi-
tal environment.
NOTE:
U
T
is the AC mains voltage prior to the application of the test
level.
Guidance and Manufacturer’s Declaration—Electromagnetic
Immunity
The Jaundice Meter is intended for use in the electromagnetic envi-
ronments specified below. The customer or user of the unit should
ensure that the unit is used in such environments.
Immunity
Test
IEC 60601
Test L evel
Compliance
Level
Electromagnetic
Environment—
Guidance