Instructions for use | LAR 8000 63
Storage | en
2. Fill the correspondingly marked compressed gas cylinders with oxygen or mixed
gas. The max. filling pressure is 200 bar.
9 Storage
– Carefully dry the rebreather and open the mouthpiece closure.
– Mount the rebreather.
– Only screw on the lid of the CO
2 absorber loosely, do not tighten it.
– Place the rebreather in the storage box (the rebreather must be dry).
– Place the device housing downwards, breathing hoses and straps on the
breathing bag.
– Store the disconnected rebreather in a cool and dry place protected from dust
and dirt as well as direct light, sun and heat radiation.
Observe guidelines for storage, maintenance, and cleaning of rubber products
(e.g., ISO 2230).
10 Disposal
11 Technical data
11.1 Rebreather
This product must not be disposed of as household waste. This is indicated
by the adjacent icon.
You can return this product to Dräger free of charge. For information please
contact the national marketing organisations and Dräger.
Ambient conditions
When diving 0 °C to 40 °C
During transport and storage -30 °C to 50 °C
Weight
(Rebreather ready for use with filled compressed 1.5 liter gas cylinder)
On land Approx. 13 kg (depending on the exact
product configuration)
In the water Neutral
Breathing bag Usable volume approx. 5.5 L
Soda lime disposable cartridge Dräger DiveSorb Go 8000
Soda lime, loose
Approx. 2.4 kg Dräger DiveSorb
®
Pro
Opening pressure of the relief valve Adjustable from 4 mbar to 90 mbar
To Next Page
Loading...
