Section 5 - Operation
Monitoring System
Understanding
the Configuration
Keys
When the Configure screen is displayed, the control keys function
according to the labels on the screen.
Key
Label Configuration Function
SELECT
Selects a parameter on the Configure
screen by highlighting it with a box
INC
Increases the value of the highlighted
parameter
TRACE
DEC
Decreases the value of the highlighted
parameter
TREND
EXIT
Exits the Configure screen and returns to
the standard display
Changing
Parameter Values
Follow this procedure for each parameter you want to change.
1. Press the SELECT key until the parameter you want to change is
highlighted with a box.
2. Change the value of the highlighted parameter:
• To increase the value, press the INC key.
• To decrease the value, press the DEC key.
Exiting the
Configure Screen
To exit the Configure screen immediately, press the EXIT key.
NOTE: The monitoring system automatically exits the Configure
screen if no keys are pressed for one minute.
When you exit the Configure screen, the values displayed on the screen
are saved. The monitoring system uses these values until they are
changed.
5-9-5
To Next Page
Loading...
