Dräger Narkomed 2B - Working with Trend Data

Section 5 - Operation
Monitoring System
OP20018
CURRENT
SWEEP
THRESHOLD
A
LARM LIMIT
PREVIOUS
SWEEP
GAP IN TRACE REPRESENTS
DIVISION BETWEEN
CURRENT SWEEP
AND PREVIOUS SWEEP
40
0
125
0
PREVIOUS
SWEEP
CURRENT
SWEEP
Working with
Trend Data
The NARKOMED monitor records measurements for the following
variables over time: percent oxygen, breathing rate, and minute volume.
You can display trend, or historical, data for these variables on the
Trace and Trend display area at the bottom of the left-hand screen. If
compatible external monitors (i.e., pulse oximeter, NIBP, or CO
2
) have
been interfaced with the system, trend displays for oxygen saturation,
pulse, temperature, blood pressure, and CO
2
parameters can also appear.
Displaying
Trend Data
TREND
1. To display trend data, press the TREND key.
Trend data for the first monitored variable is displayed.
2. To cycle through all of the available trend displays, continue pressing
the TREND key.
If trend data for a variable does not appear, that variable’s monitor
is not supplying information.
5-9-8