Section 5 - Operation
Monitoring System
Right-Hand
Screen
The right-hand screen displays the time, as well as numerical
measurements for oxygen concentration, breathing pressure, and
respiratory volume. The most current measurements are always
displayed on this screen, as long as the associated monitor is supplying
information.
The keys to the right of the display area allow you to configure the
anesthesia machine, calibrate the oxygen sensor, set alarm limits, and
turn the apnea and volume alarms on and off. Configuration of the
machine and control of audible alarms are explained in this section. The
remaining monitor control functions are described in the following
sections: “Oxygen Monitoring,”“Respiratory Volume Monitoring,” and
“Breathing Pressure Monitoring.”
ATA
ISPLAY
MONITOR
CONTROLS
CONFIG
KEY
CONFIG LO
HI
HI 21%
O
2
CAL
OXYGEN ALARMS
PRESSURE ALARMS
MINUTE VOLUME ALARMS
VOLUME
ALARMS
DISABLE
APNEA
ALARM
DISABLE
LO
TIME
% OXYGEN
MEAN
BPM
PEEP PEAK
TID VOL
MIN VOL
5.6100.58
44112
40
100
11:58
OP20055
30
50
12
3.0
5-9-3
To Next Page
Loading...
