Need help?Do you have a question about the Dräger PEX 3000 and is the answer not in the manual?
General| Measurement Range (LEL) | 0 to 100 % LEL |
|---|---|
| Resolution | 1 % LEL |
| Accuracy | ±3 % LEL |
| Output Signal | 4 to 20 mA |
| Approvals | ATEX, IECEx, UL, CSA |
| Measurement Range (PPM) | Not applicable |
| Operating Temperature | -40 °C to +65 °C (-40 °F to +149 °F) |
| Operating Humidity | 10 - 90% RH (non-condensing) |
| Power Supply | 16 to 30 V DC |
| Enclosure | Stainless steel |
| Ingress Protection | IP66 |
| Protection Class | Ex d IIC T6 |
| Weight | Approximately 1.5 kg |
| Communication | HART |
| Sensor Type | Catalytic bead sensor |
To Next Page
