Dräger Primus Series User Manual

Reassembly instructions
• Replace the ventilator diaphragm
• Replace the breathing block (A)
and tighten the 3 sealing screws
• Replace the metal heater plate (B)
• Replace the cover and tighten the
5 sealing screws (C)
• Replace the inspiratory and
expiratory ports
• Replace the accessory items
Cleaning
23

Dräger Primus Series Specifications

General

Type	Anesthesia Workstation
Display	Color Touchscreen
Power Supply	AC Mains (100-240V, 50/60Hz)
Backup Battery	Minimum 30 minutes (depending on configuration and usage)
Tidal Volume Range	20 to 1500 mL
Respiratory Rate	4 to 100 bpm
Inspiratory Time	0.2-5.0 sec
PEEP	0-20 mbar
Gas Supply	O2, N2O, Air
Alarms	Apnea, Gas Supply
Ventilation Modes	Manual, Pressure Support, SIMV
O2 Flush	35 to 45 L/min