Dragino LHT65 - Decoder in TTN; BAT-Battery Info

www.dragino.com
LHT65 Temperature & Humidity sensor 13 / 56
2.4.1 Decoder in TTN
Please check the decoder from this link:
http://www.dragino.com/downloads/index.php?dir=LHT65/payload_decode/
2.4.2 BAT-Battery Info
These two bytes of BAT include the battery state and the actually voltage
Bit(bit)
[15:14]
[13:0]
Value
BAT Status
00(b): Ultra Low ( BAT <= 2.50v)
01(b): Low (2.50v <=BAT <= 2.55v)
10(b): OK (2.55v <= BAT <=2.65v)
11(b): Good (BAT >= 2.65v)
Actually BAT voltage
Check the battery voltage for LHT65.
➢ BAT status=(0xCBF6>>14)&0xFF=11(B)，very good
➢ Battery Voltage =0xCBF6&0x3FFF=0x0BF6=3062mV