www.dragino.com
LHT65 Temperature & Humidity sensor 17 / 56
Means: The device is set to connect to an Interrupt Sensor, the cable connection is fine. This
packet is for a normal uplink, pin level is high.
Means: The device is set to connect to an Interrupt Sensor, the cable connection is fine. This
packet is for a Interrupt uplink, pin level is low.
Means: The device is set to connect to an Interrupt Sensor, the cable connection is losing.
(Notice: PA9 and PA10 must be connected to detect if cable is losing or fine.).
To Next Page
Loading...
