Vigor2912 Series User’s Guide
104
Modem Initial String
Such value is used to initialize USB modem. Please use the
default value. If you have any question, please contact to
your ISP.
The maximum length of the string you can set is 47
characters.
APN Name
APN means Access Point Name which is provided and
required by some ISPs. Type the name and click Apply.
The maximum length of the name you can set is 43
characters.
Modem Initial String2
The initial string 1 is shared with APN.
In some cases, user may need another initial AT command
to restrict 3G band or do any special settings.
The maximum length of the string you can set is 47
characters.
Modem Dial String
Such value is used to dial through USB mode. Please use
the default value. If you have any question, please contact
to your ISP.
The maximum length of the string you can set is 31
characters.
PPP Username
Type the PPP username (optional). The maximum length of
the name you can set is 63 characters.
PPP Password
Type the PPP password (optional). The maximum length of
the password you can set is 62 characters.
PPP Authentication
Select PAP only or PAP or CHAP for PPP.
Index (1-15) in Schedule
Setup
You can type in four sets of time schedule for your request.
All the schedules can be set previously in Application >>
Schedule web page and you can use the number that you
have set in that web page
WAN Connection
Detection
Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping
Detect.
Mode – Choose ARP Detect or Ping Detect for the system
to execute for WAN detection.
Ping IP – If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
TTL (Time to Live) – Displays value for your reference.
TTL value is set by telnet command.
After finishing all the settings here, please click OK to activate them.
To Next Page
Loading...
Need help?
General
