Vigor2912 Series User’s Guide
179
4
4
.
.
5
5
.
.
1
1
G
G
e
e
n
n
e
e
r
r
a
a
l
l
S
S
e
e
t
t
u
u
p
p
General Setup can determine the standard (rule-based or user-based) for the users controlled
by User Management. The mode (standard) selected here will influence the contents of the
filter rule(s) applied to every user.
Available settings are explained as follows:
Item Description
Mode
There are two modes offered here for you to choose. Each
mode will bring different filtering effect to the users
involved.
User-Based - If you choose such mode, the router will
apply the filter rules configured in User
Management>>User Profile to the users.
Rule-Based –If you choose such mode, the router will
apply the filter rules configured in Firewall>>General
Setup and Filter Rule to the users.
Web Authentication
Choose the protocol for web authentication.
Landing Page
Type the information to be displayed on the first web page
when the LAN user accessing into Internet via such router.
After finishing all the settings here, please click OK to save the configuration.