Draytek Vigor2912 Series User Manual

Vigor2912 Series User’s Guide
5
1
1
.
.
2
2
.
.
2
2
F
F
o
o
r
r
V
V
i
i
g
g
o
o
r
r
2
2
9
9
1
1
2
2
n
n
LED Status Explanation
Blinking The router is powered on and running normally. ACT (Activity)
Off The router is powered off.
On The Web Content Filter is active. (It is enabled from
Firewall >> General Setup).
WCF
Off The Web Content Filter is inactive.
QoS
On The QoS function is active.
On
Wireless access point is ready.
WLAN
Blinking
It will blink slowly while wireless traffic goes through.
ACT and WLAN LEDs blink quickly and
simultaneously when WPS is working, and will return
to normal condition after two minutes. (You need to
setup WPS within 2 minutes.)
On The port is connected.
Off The port is disconnected.
LAN (P4~P1)
Blinking The data is transmitting.
On Internet connection is ready.
Off Internet connection is not ready.
WAN(W2~W1)
Blinking The data is transmitting.
VPN On The VPN tunnel is active.
On USB device is connected and ready for use. USB
Blinking The data is transmitting.

Draytek Vigor2912 Series Specifications

General

Brand	Draytek
Model	Vigor2912 Series
Category	Network Router
Language	English