Vigor2912 Series User’s Guide
244
Common Name
Identifier
Type or edit the common name identifier for the LDAP server.
The common name identifier for most LDAP server is “cn”.
Base Distinguished
Name / Group
Distinguished Name
Type or edit the distinguished name used to look up entries on
the LDAP server.
Sometimes, you may forget the Distinguished Name since it’s
too long. Then you may click the
button to list all the
account information on the AD/LDAP Server to assist you
finish the setup.
After finished the above settings, click OK to save and exit this page. A new profile has been
created.
4
4
.
.
9
9
.
.
5
5
U
U
P
P
n
n
P
P
The UPnP (Universal Plug and Play) protocol is supported to bring to network connected
devices the ease of installation and configuration which is already available for directly
connected PC peripherals with the existing Windows 'Plug and Play' system. For NAT routers,
the major feature of UPnP on the router is “NAT Traversal”. This enables applications inside
the firewall to automatically open the ports that they need to pass through a router. It is more
reliable than requiring a router to work out by itself which ports need to be opened. Further,
the user does not have to manually set up port mappings or a DMZ. UPnP is available on
Windows XP and the router provide the associated support for MSN Messenger to allow full
use of the voice, video and messaging features.
Available settings are explained as follows:
Item Description
Enable UPNP Service
Accordingly, you can enable either the Connection Control
Service or Connection Status Service.
Default WAN
It is used to specify the WAN interface for applying such
function.
After setting Enable UPNP Service setting, an icon of IP Broadband Connection on Router
on Windows XP/Network Connections will appear. The connection status and control status
will be able to be activated. The NAT Traversal of UPnP enables the multimedia features of
To Next Page
Loading...
Need help?
General
