Vigor2912 Series User’s Guide
195
2. The configuration page will be shown as follows:
Available settings are explained as follows:
Item Description
Name
Type a name for this profile.
Protocol
Specify the protocol(s) which this profile will apply to.
Source/Destination
Port
Source Port and the Destination Port column are available
for TCP/UDP protocol. It can be ignored for other
protocols. The filter rule will filter out any port number.
(=) – when the first and last value are the same, it indicates
one port; when the first and last values are different, it
indicates a range for the port and available for this profile.
(!=) – when the first and last value are the same,
it
indicates all the ports except the port defined here;
when the first and
last values are different, it indicates that
all the ports except the range defined here are available for
this service type.
(>) – the port number greater than this value is available.
(<) – the port number less than this value is available for
this profile.
3. After finishing all the settings, please click OK to save the configuration.
To Next Page
Loading...
Need help?
General
