Draytek Vigor2912 Series User Manual

Vigor2912 Series User’s Guide
299
Note: You should also set RADIUS Server simultaneously
if 802.1x mode is selected.
Disable - Turn off the encryption mechanism.
WEP-Accepts only WEP clients and the encryption key
should be entered in WEP Key.
WEP/802.1x Only - Accepts only WEP clients and the
encryption key is obtained dynamically from RADIUS
server with 802.1X protocol.
WPA/802.1x Only- Accepts only WPA clients and the
encryption key is obtained dynamically from RADIUS
server with 802.1X protocol.
WPA2/802.1x Only- Accepts only WPA2 clients and the
encryption key is obtained dynamically from RADIUS
server with 802.1X protocol.
Mixed (WPA+WPA2/802.1x only) - Accepts WPA and
WPA2 clients simultaneously and the encryption key is
obtained dynamically from RADIUS server with 802.1X
protocol.
WPA/PSK-Accepts only WPA clients and the encryption
key should be entered in PSK.
WPA2/PSK-Accepts only WPA2 clients and the
encryption key should be entered in PSK.
Mixed (WPA+ WPA2)/PSK - Accepts WPA and WPA2
clients simultaneously and the encryption key should be
entered in PSK.
WPA
The WPA encrypts each frame transmitted from the radio
using the key, which either PSK (Pre-Shared Key) entered
manually in this field below or automatically negotiated via
802.1x authentication. Either 8~63 ASCII characters, such
as 012345678(or 64 Hexadecimal digits leading by 0x, such
as "0x321253abcde...").
Type - Select from Mixed (WPA+WPA2) or WPA2 only.
Pre-Shared Key (PSK) - Either 8~63 ASCII characters,
such as 012345678..(or 64 Hexadecimal digits leading by
0x, such as "0x321253abcde...").
WEP
64-Bit - For 64 bits WEP key, either 5 ASCII characters,
such as 12345 (or 10 hexadecimal digitals leading by 0x,
such as 0x4142434445.)

Draytek Vigor2912 Series Specifications

General

Brand	Draytek
Model	Vigor2912 Series
Category	Network Router
Language	English