Vigor2920 Series User’s Guide
218
3. Set Inbound/Outbound bandwidth.
Note: The rate of outbound/inbound must be smaller than the real bandwidth to
ensure correct calculation of QoS. It is suggested to set the bandwidth value for
inbound/outbound as 80% - 85% of physical network speed provided by ISP to
maximize the QoS performance.
4. Return to previous page. Enter the Name of Index Class 1 by clicking Edit link. Type the
name “E-mail” for Class 1.
5. For this index, the user will set reserved bandwidth (e.g., 25%) for E-mail using protocol
POP3 and SMTP.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
To Next Page
Loading...
