Vigor2920 Series User’s Guide
184
Available settings are explained as follows:
Item Description
Enable Open Ports
Check to enable this entry.
Comment
Make a name for the defined network application/service.
WAN Interface
Specify the WAN interface that will be used for this entry.
Local Computer
Type the private IP address of the local host or click Choose
PC to select one.
Choose PC - Click this button and, subsequently, a window
having a list of private IP addresses of local hosts will
automatically pop up. Select the appropriate IP address of the
local host in the list.
Protocol
Specify the transport layer protocol. It could be TCP, UDP, or
----- (none) for selection.
Start Port
Specify the starting port number of the service offered by the
local host.
End Port
Specify the ending port number of the service offered by the
local host.
After finishing all the settings here, please click OK to save the configuration.
To Next Page
Loading...
Need help?
General
