EasyManuals Logo

Draytek Vigor2950 Series User Manual

Draytek Vigor2950 Series
217 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #141 background imageLoading...
Page #141 background image
Vigor2950 Series User’s Guide
133
11b only - The radio only supports IEEE802.11b.
Index(1-15) Set the wireless LAN to work at certain time interval
only. You may choose up to 4 schedules out of the 15
schedules pre-defined in Applications >> Schedule
setup. The default setting of this filed is blank and the
function will always work.
SSID The default SSID is "default". We suggest you change it
to a particular name. It is the identification of the wireless
LAN. SSID can be any text numbers or various special
characters.
Channel The channel of frequency of the wireless LAN. The
default channel is 6. You may switch channel if the
selected channel is under serious interference.
Hide SSID Check it to prevent from wireless sniffing and make it
harder for unauthorized clients or STAs to join your
wireless LAN. Depending on the wireless utility, the user
may only see the information except SSID or just cannot
see any thing about Vigor wireless router while site
surveying.
Long Preamble This option is to define the length of the sync field in an
802.11 packet. Most modern wireless network uses short
preamble with 56 bit sync filed instead of long preamble
with 128 bit sync field. However, some original 11b
wireless network devices only support long preamble.
Check it to use Long Preamble if needed to
communicate with this kind of devices.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Draytek Vigor2950 Series and is the answer not in the manual?

Draytek Vigor2950 Series Specifications

General IconGeneral
BrandDraytek
ModelVigor2950 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals