Vigor2950 Series User’s Guide
152
3
3
.
.
1
1
4
4
.
.
1
1
S
S
y
y
s
s
t
t
e
e
m
m
S
S
t
t
a
a
t
t
u
u
s
s
The System Status provides basic network settings of Vigor router. It includes LAN and
WAN interface information. Also, you could get the current running firmware version or
firmware related information from this presentation.
Model Name Display the model name of the router.
Firmware Version Display the firmware version of the router.
Build Date/Time Display the date and time of the current firmware build.
MAC Address Display the MAC address of the LAN Interface.
1
st
IP Address Display the IP address of the LAN interface.
1
st
Subnet Mask Display the subnet mask address of the LAN interface.
DHCP Server Display the current status of DHCP server of the LAN
interface.
MAC Address Display the MAC address of the WAN Interface.
IP Address Display the IP address of the WAN interface.
Default Gateway Display the assigned IP address of the default gateway.
DNS Display the assigned IP address of the primary DNS.
MAC Address Display the MAC address of the wireless LAN.
Frequency Domain It can be Europe (13 usable channels), USA (11 usable
channels) etc. The available channels supported by the
wireless products in different countries are various.
Firmware Version It indicates information about equipped WLAN miniPCi
card. This also helps to provide availability of some
features that are bound with some WLAN miniPCi card.
3
3
.
.
1
1
4
4
.
.
2
2
T
T
R
R
-
-
0
0
6
6
9
9
S
S
e
e
t
t
t
t
i
i
n
n
g
g
Vigor router with TR-069 is available for matching with VigorACS server. Such page
provides VigorACS and CPE settings under TR-069 protocol. All the settings configured
here is for CPE to be controlled and managed with VigorACS server. Users need to type
To Next Page
Loading...
Need help?
General
