Vigor2950 Series User’s Guide
17
Online status for DHCP
Detailed explanation is shown below:
Primary DNS Displays the IP address of the primary DNS.
Secondary DNS Displays the IP address of the secondary DNS.
LAN Status
IP Address Displays the IP address of the LAN interface.
TX Packets Displays the total transmitted packets at the LAN interface.
RX Packets Displays the total number of received packets at the LAN interface.
WAN1/2 Status
Line Displays the physical connection (Ethernet) of this interface.
Name Displays the name set in WAN1/WAN web page.
Mode Displays the type of WAN connection (e.g., PPPoE).
Up Time Displays the total uptime of the interface.
IP Displays the IP address of the WAN interface.
GW IP Displays the IP address of the default gateway.
TX Packets Displays the total transmitted packets at the WAN interface.
TX Rate Displays the speed of transmitted octets at the WAN interface.
RX Packets Displays the total number of received packets at the WAN
interface.
RX Rate Displays the speed of received octets at the WAN interface.
ISDN Status
Channel Active Conn. Displays the active connection status for each channel.
TX Pkts Displays the total transmitted packets at the ISDN interface.
TX Rate Displays the speed of transmitted octets at the ISDN interface.
RX Pkts Displays the total number of received packets at the ISDN
interface.
RX Rate Displays the speed of received octets at the ISDN interface.
Up Time Displays the total uptime of the interface.
AOC Displays the charge information of the interface.
To Next Page
Loading...
Need help?
General
