23 EN
• The robot can navigate slopes with an incline up to 50% (27° ). However, for better mowing results, it is
recommended to keep the slopes of work areas below 25% (14° ).
• For areas narrower than 80 cm, please set them as paths to allow the robot to pass through (see section 5.4:
Set Path).
• If your lawn is more than 4 cm higher than the adjacent ground, keep the robot at least 10 cm away
from the edge. If your lawn is level with the adjacent ground, the robot can cross the perimeter for optimal
mowing results along the edges.
• Make sure the turning angles are greater than 90° . Angles smaller than 90° can make it dicult for the
robot to achieve a clean cut.
To Next Page
Loading...
