DSC HS2016

Section 6: Programming Worksheets
003 – Partition 6 Opening/ Closing:
o Receiver #1 o Receiver #3
o Receiver #2 o Receiver #4
[317]
Partition 7 Call Directions
001 – Partition 7 Alarm/ Restore:
R Receiver #1 o Receiver #3
o Receiver #2 o Receiver #4
002 – Partition 7 Tamper/ Restore:
R Receiver #1 o Receiver #3
o Receiver #2 o Receiver #4
003 – Partition 7 Opening/ Closing:
o Receiver #1 o Receiver #3
o Receiver #2 o Receiver #4
[318]
Partition 8 Call Directions
001 – Partition 8 Alarm/ Restore:
R Receiver #1 o Receiver #3
o Receiver #2 o Receiver #4
002 – Partition 8 Tamper/ Restore:
R Receiver #1 o Receiver #3
o Receiver #2 o Receiver #4
003 – Partition 8 Opening/ Closing:
o Receiver #1 o Receiver #3
o Receiver #2 o Receiver #4
[350] Communicator Formats
Description on page 108
(2-Digit decimal)
001 – Receiver 1: 003 – Receiver 3:
Range: 03= Contact ID, 04= SIA (Default) 002 – Receiver 2: 004 – Receiver 4:
[377] Communication Variables
(3-digit decimal)
Range: 000-255 attempts unless otherwise noted
Description on page 1
001 – Swinger Shutdown Attempts:
Alarms and Restore (000-014):
Default: 003
Tampers and Restore:
(
CP-01
Default: 002)
Maintenance and Restore:
002 – Communication Delays:
Communication Zone Delay (
Default: 000
CP-01
Default: 030):
AC Failure Communication Delay (Default:030 minutes/Hours):
TLM Trouble Delay (
NA
Default: 010 checks
EN
Default:002
checks):
Wireless Zone Low Bat. Transmission Delay (Default: 007 days):
Delinquency Transmission Cycle Delay (Default: 030 days/hours):
Communications Cancel Window (
Default: 000 minutes
CP-01
Default:
005 minutes):
003 – Periodic Test Transmission Cycle (Default: 030 hours/days):
004 – Periodic Test Transmission Time of Day (Default: 9999):
011 – Maximum Dialing Attempts: (Default: 005):
012 – Delay Between PSTN Attempts: (Default: 003 seconds):
- 161 -