Table of Contents
Warning: Installer Please Read Carefully 3
Alarm.com introduction 5
IP/HSPA 3G module - TL8803GI-EU 5
Contact information 6
Features 6
Communicator ratings 6
Communicator compatibility 7
Installation 8
Tools and supplies required 8
Step 1: Enable module 9
Step 2: Connect the TL8803GI-EU 9
1: Connect data bus 9
2: Connect power 10
3:Connect the PC-Link cable 10
4: Connect Ethernet (optional) 10
5: Connect external antenna (optional) 10
6: Power up 11
Step 3: Verify installer code to activate Alarm.com module 11
Step 4: Perform dual-path test (module registration) 11
Step 5: Allow module to auto-program 11
Enroll Alarm.com Image Sensor 11
Panel settings 12
Central station and telephone line settings 12
Troubleshooting 15
Module status information 15
Troubleshooting LEDs 15
LED functions 16
LED details 16
LED L1 (red) 16
LED L2 (yellow) 17
LED L3 (yellow) 17
LED L4 (green) 17
LED L5 (yellow) 18
Various module states (modes) 18
Improving wireless signal strength 19
Walking the customer through new user setup on the web 19
Interactive Service Menu 20
Interactive menus 20
Installer programming 20
User functions 20
Limited Warranty 22
End User License Agreement 22
Regulatory Information 24
- 2 -
To Next Page
Loading...
Need help?
General
