Maintenance, Spares and Repair
41
8 MAINTENANCE, SPARES, REPAIR AND SERVICING
The module is designed to be Fit and Forget. As such, there are no user serviceable parts. In the
case of malfunction you should contact your original equipment supplier (OEM).
If you require additional plugs from DSE, please contact our Sales department using the part numbers
below.
Module Terminal Designation Description Part No.
1-6
6 way 5.08mm 007-446
A B SCR 3 way 5.08mm 007-174
If you require antennae or USB cables, please contact our Sales department using the part numbers
below.
Connection Description Part No.
USB USB A to USB B (DSE892 to host controller) 016-125
8.1 WARRANTY
DSE provides limited warranty to the equipment purchaser at the point of sale. For full details of any
applicable warranty, you are referred to your original equipment supplier (OEM).
8.2 DISPOSAL
8.2.1 WEEE (WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
Directive 2002/96/EC
If you use electrical and electronic equipment you must store, collect, treat,
recycle and dispose of WEEE separately from your other waste.
8.3 ROHS (RESTRICTION OF HAZARDOUS SUBSTANCES)
Directive 2002/95/EC:2006
To remove specified hazardous substances (Lead, Mercury, Hexavalent Chromium, Cadmium, PBB &
PBDE´s)
Exemption Note: Category 9. (Monitoring & Control Instruments) as defined in Annex 1B of the WEEE
directive will be exempt from the RoHS legislation. This was confirmed in the August 2005 UK´s
Department of Trade and Industry RoHS REGULATIONS Guide (Para 11).
Despite this exemption DSE has been carefully removing all non RoHS compliant components from
our supply chain and products.
When this is completed a Lead Free & RoHS compatible manufacturing process will be phased into
DSE production.
This is a process that is almost complete and is being phased through different product groups.
To Next Page
Loading...