DT Research WebDT 435 User Manual

Rev Date 9/16/2010
27
3. Run WebDT 435 USB Recovery program on the PC or
Notebook. A dialog window will be shown as the right
picture. The WebDT 435 should be connected with the
PC now as shown at bottom of the dialog window.
(DT43x USB Devices connected or DT43X USB Devices
not Connected)
4. Turn on the WebDT 435. After the device is turned
on,
immediately
press the fourth button .
5. Then, within 0.5 seconds, press the third
button
, then the OS Recovery menu will be
shown as the blue screen at right.
6. Press the fourth Button
to select “Recovery
OS” in the menu.
7. Press the third button
to execute Recovery
OS. The screen will display below message as right
picture:
Enter LowLevelFormat.
Done.
Please send the file through USB.

DT Research WebDT 435 Specifications

General

Brand	DT Research
Model	WebDT 435
Category	Handhelds
Language	English