Rev Date 9/16/2010
Using the Button Manager
The Button Manager is an application you can use to
customize the functions of the 3 front buttons, the 2 side
buttons and the combinations function buttons.
Run
→
→
or click the
icon in the taskbar to launch the
program.
The 3 buttons on top left of the keypad are user programmable
(predefined: Activate/deactivate on-screen keyboard, no action, and
activate/ deactivate System Utility).
If a scanner is installed, the two side trigger buttons are used to trigger the
scanner and are not programmable. If your WebDT 435 doesn’t come with
a scanner, then these two buttons will have no default functions and can
be assigned to trigger other functions.
Screen Calibration:
Hold the
button, and press the button to start the screen
calibration. Before the screen calibration starts, an instruction message
will be displayed on the screen to guide you to calibrate the touch screen
displays. Follow the instructions to complete the screen calibration.
Non-programmable Buttons:
Following buttons are non-programmable.
To Next Page
Loading...
Need help?
General