Trip 1 information
The trip information “TRIP 1”, “TRIP 1 TIME”, “CONS.
AVG 1” and “SPEED AVG 1”, when selected, can be
reset by pressing the ENTER (4): the
message “RESET?” is displayed instead of the unit
of measurement.
If you press (1) or (2), the instrument panel will
display TRIP 1 again, without the value. If,
instead, (4) is pressed, the value is reset.
When the trip 1 information is reset, all the meters
that refer to it are reset as well (“TRIP 1”, “TRIP 1
TIME”, “CONS. AVG 1” and “SPEED AVG 1”).
TRIP 2 information
The “TRIP 2” information can be reset by pressing
the (4): the message “RESET?” is displayed
instead of the value and unit of measurement.
If you press (1) or (2), the instrument panel will
display TRIP 2 again, without the value. If,
instead, (4) is pressed, the value is reset.
159