Main use and
maintenance operations
"Checking coolant level and topping
up, if necessary"
Check coolant level in the expansion tank on the
right side of the steering tube.
Check the level according to the intervals indicated
in the tables in "Scheduled maintenance
Steer completely to the and check that the level
is between the MIN and MAX marks on the side of
the expansion reservoir.
Top up if the level is below the MIN mark.
Unscrew the filler plug (1) and add ENI Agip
Permanent Spezial antifreeze (do not dilute, use
pure), until reaching the MAX level.
Screw plug (1).
This type of mixture ensures the best operating
conditions (the coolant to freeze at
-20 °C/-4 °F).
Fig 175
222
To Next Page
Loading...
Need help?
General
