Centre stand
Always use the centre stand (1) to safely park the
motorcycle. Its structure ensures proper of
the motorcycle even under full load.
Before lowering the centre stand, make sure
that the bearing is hard and flat.
Push with your right foot onto central stand bearing
(2), until it touches the ground; meanwhile
pull the motorcycle up and back.
To bring central stand at rest, just push motorcycle
forward, holding it at the handlebar, until the rear
wheel touches the ground. Stand will automatically
go back in place.
Before moving always make sure that the
central stand is at its rest position.
Fig 44
Fig 45
71
To Next Page
Loading...
