Music (if any)
This function allows you to manage the music player
and is only available if the Bluetooth module is
installed and a connected.
For the Bluetooth pairing procedure, refer to sub-
section “Bluetooth device pairing and management”
(page 19).
Use (1) and (2) to select “PLAYER” in the
function menu (page 156):
1) If the music player is not active, the instrument
panel displays “PLAYER OFF”. To activate it and
enter the music player menu, press (4).
2) If Player is active, the instrument panel displays
“PLAYER ON”. To access the music player menu,
keep (1) pressed for 2 seconds. To turn
the music Player press (4).
Note
The Player function cannot be activated when a
call is incoming, in progress or in recall. If the
is disconnected, player is turned
Fig 15
Fig 16
34
To Next Page
Loading...
Need help?
General
