Once the music Player is on (PLAYER ON), press
(1) for 2 seconds to open it in control mode.
The name of audio file is shown in rolling mode in the
Menu and music player control graphics is available.
If instrument panel is not receiving track name, it
pauses the track being played and will show the
message “NOT AVAILABLE” in rolling mode.
If the contains no tracks that can be
read, the instrument panel shows again the message
“NOT AVAILABLE”.
When the music player is turned on, within music
player control page, (1), (2) and
(4) can only be used to control the player.
●
Volume up: Press (1) once.
●
Volume down: Press (2) once.
●
Pause / Play: Press (4) for 2 seconds.
●
Skip / Next track: Press (4) once. Each
press corresponds to a track skipped.
Press (2) for 2 seconds to quit Player controls
(although maintaining Player ON). The instrument
panel will display “PLAYER” and “ON”.
music player controls:
●
player and its volume can no longer be
controlled via the instrument panel;
●
(1), (2) and (4) have the
normal functions.
Note
Music is played on the connected
via Bluetooth. If the rider and passenger intercoms
are also connected to the instrument panel the
music is played through the intercoms.
Fig 17
35
To Next Page
Loading...
Need help?
General
