Duplo DBM-600 User Manual

1-24
Chapter 1 Before Operation
No. Item Details
[5] Stitching width (outside)
*Displayed when the 4 STITCH KIT
(option) is attached.
Out of 4 stitches, enter the stitching width for 2 stitches on the
operator's side and the other 2 on the non-operator's side.
[6] Stitching width (inside) Enter the stitching with for the middle 2 stitches.
[7] Head/foot trimming width 1 Displays the head trimming of a booklet.
For oset trimming o: When the nished width is entered, the
trimming width is automatically displayed.
For oset trimming on (option): Enter the head trimming width.
Default: 3 mm/0.12 inch
[8] Head/foot trimming width 2 Displays the foot trimming of a booklet.
For oset trimming o: When the nished width is entered, the
trimming width is automatically displayed.
For oset trimming on (option): When the head/foot trimming width
1 is entered, the value is automatically displayed.
Default:3 mm/0.12 inch
[9] Job setting icon This icon means that you are currently setting a job.
[10] Memory No. Displays the memory No. for which you are currently making
settings.
[11] Return key Returns to the [Main] screen without saving the settings.
[12] Previous page key Returns to the paper size entry screen.
[13] key Conrms the value entered. If the value entered is not within the
setting range, you will hear the beep sound twice. The value entered
will be invalid.
Information on offset trimming
The default for the head/foot trimming width [3.0] is displayed in [7]. If you have selected “oset trimming
on,” you can change the value.
“Oset trim” means to widen trimming width either at the head or the foot.
In the normal head/foot trimming, the same amount is trimmed at both sides. When the OFFSET TRIM KIT
(option) is installed to the DKT-200, you can specify dierent trimming width between the head and the foot.
To specify the dierent width between the head and the foot, the following three conditions need to be
satised.
- The width of the booklet conveyed to the DKT-200 is 341 mm/13.42 inches or less.
- The respective width of the head and foot is between 1 mm and 30 mm/0.04 inch and 1.18 inches.
- The dierence of the trimming width between the head and foot is between 0 mm and 21 mm/0
inches and 0.83 inch.
Example)
When the trimming width at the head side is 1 mm/0.04 inch, the trimming width at the foot side varies
between 1 mm and 22 mm/0.04 inch and 0.87 inch depending on the nished size.

Duplo DBM-600 Specifications

General

Brand	Duplo
Model	DBM-600
Category	Folding Machines
Language	English