5
Use only the power supply voltage displayed.
AC220-240V
Ensure that the total current of all the units connected to the wall outlet does not
exceed power supply capacity.
When using the extension cord, ensure that the total current of all the units connected
to this extension cord does not exceed the specification of the extension cord.
If it exceeds the specified current or power supply capacity, fire hazards may result.
Do not scratch, damage, or remodel the power cord.
Do not place heavy objects on the power cord, nor pull or bend it.
Or the power cord will damage and cause fire and electric hazards.
Disconnect the power plug from the outlet by pulling the plug instead of the power
cord.
Pulling the power cord will damage the power cord and cause fire and electric hazards.
If the power plug or cord becomes abnormally hot, first turn off the power switch and
disconnect the power plug from the outlet.
If used continuously in this state, fire and electrical hazards may result. Contact your
dealer.
Do not bind up the power cord even if it is too long, or this will cause poor heat emis-
sion and fire hazards as a result.
Do not touch the power plug with wet hands, or electric hazards may result.
1. WARNING
+ 6%
–10%
Disconnect Plug
Proh bited
Prohibited
Prohibited
Proh bited
Check Capacity
Voltages Other than
220-240V Prohibited
To Next Page
Loading...
Need help?
General
