27
7. On this Occasion
7-1. When the Feed Bin Error Lamp Blinks
Cause
• This lamp flashes on and off when the paper on the
feed bin runs out or when misfeed occurs.
Countermeasures
• Remove sheets of paper discharged to the paper
receiver tray because they are not sufficient in volume
to make a single collated set.
• Replace paper when it runs out.
• Separate the paper and place it on the feed bin when
misfeed occurs.
• Press the start key to turn off the error lamp and to
restart operation.
To Next Page
Loading...
Need help?
General
