What to do if single-folded thick paper jams at the folding rollers of Duplo Folding Machines?
If single-folded thick paper jams at the folding rollers in your Duplo folding machine, ensure you are using paper that meets the specifications. Decrease the paper feed pressure and fan the paper well.
What to do if the folding stopper of folding plate 1 or 2 does not operate in Duplo Folding Machines?
If the folding stopper of folding plate 1 or 2 does not operate in your Duplo folding machine, turn off the power, and insert that control cord into the connector.
General| Paper Feed Tray Capacity | 500 sheets |
|---|---|
| Type | Folding Machine |
| Folding Types | Letter, Gate |
| Paper Weight | 40-200 gsm |
| Power Supply | 60Hz |
Details the manual's structure and purpose.
Lists essential warnings for preventing severe injury or death.
Safety cautions for preventing minor injury or physical damage.
Advice on choosing a suitable place to install the unit.
Procedures and warnings for safely moving the paper folder.
Information on power requirements and optimal operating/storage conditions.
Lists all included parts for the paper folder.
Detailed steps for assembling and setting up the paper folder.
Identifies and describes the external components of the unit.
Identifies and describes the internal components of the unit.
Explains the buttons and indicators on the control panel.
Describes the information shown in the unit's display windows.
Explains the different audible signals and their meanings.
Guidelines on choosing and preparing paper for folding.
Instructions for properly stacking paper and detecting its size.
Checking paper direction and using the quick start guide.
Introduces standard, non-standard, and custom folding methods.
Details the supported paper sizes and folding modes.
Step-by-step guide for performing standard paper folding.
Procedures for fixing folding errors along the paper's sides.
Adjusting folding stoppers to correct vertical folding errors.
Troubleshooting deformed folds caused by paper or environment.
Defines the paper sizes usable for standard folding of non-standard paper.
Step-by-step guide for folding non-standard paper.
Defines paper size limits for custom folding operations.
Step-by-step guide for setting custom folding parameters.
Details different cross folding techniques and safety advice.
Procedure for cross folding standard paper types.
How to cross fold paper that is not standard.
Advice on folding art and coated papers due to their stickiness.
Specific steps for folding art and coated papers.
Instructions for thick paper and tips for recycled paper.
Procedure for folding small paper sizes.
How to change the stacker roller position for better ejection.
Changing stacker roller height for thick paper ejection.
Solutions for paper jams in the feed area.
How to clear jams near the paper feed ring.
Steps to remove paper jammed within folding plates.
Clearing paper wrapped around the folding rollers.
Procedures for clearing jams near folding plate 1.
Procedures for clearing jams near folding plate 2.
How to resolve paper jams in the ejection area.
Explains error messages shown on the left display.
Explains error messages shown on the right display.
Diagnosing and fixing common unit startup and operational problems.
Addressing issues like paper jams, misalignment, and double feeds.
Step-by-step instructions for cleaning the folding rollers.
How to clean paper feed rings, separator, and inlet sensor.
Technical specifications and dimensions of the paper folder.
Initial setup steps including tray adjustment and power connection.
How to load paper and perform a test fold.
Procedures for starting, stopping, and finishing paper folding.
To Next Page
