2
Accessing HELP Modes
199
c HELP Mode Function and Operation Procedures
chap.7
c HELP Mode Functions and Operation Procedures
1. During use of the DUPRINTER: first put the machine into the
standby state, then turn the Power switch OFF.
2. Simultaneously press and hold down the
and
PRINT
SPEED keys, and turn the Power switch ON with those keys held
down. After about 5 seconds, a beep-beep-beep tone will sound, and
the HELP mode display will appear.particular mode accessed.
HELP mode no.
Ex : enter 0, 1, 1, PRINT key
2HELP mode number selection screen
2HELP mode screen (HELP-011)
2 Standby
a
Power OFF
Switch OFF
Power switch
2Print speed keys and Power switch
Switch ON
Power switch
(The number blinks.)
HELP mode number entry
available
4. Press the (PRINT) key
. The HELP mode specified in
3 will be
accessed.
From this point on, follow the procedure given below for the
particular mode accessed.
¡
The HELP mode number cannot be selected by the PRINT SPEED keys
and .
IMPORTANT :
3. Using the numeric keys, enter the number of the HELP mode you
want to access.
Example: To access HELP mode H-011, enter [0], [1], [1].
To Next Page
Loading...
Need help?
General
