227
c HELP Mode Function and Operation Procedures
chap.7
Adjusting/Checking the Press Section
2
Check operation.
PRESS MOTOR / EMERGENCY SIGNAL SOLENOID / SIGNAL SOLENOID
2
Checking sensors.
PRESS CENTER SENSOR / PRESS ENCODER SENSOR /
PRESS ROLLER SENSOR
¡ Operation procedure
1.
3.
Check the following sensors.
Checking sensors.
2.
Check operation.
4.
Enter
“
013
”
by the
NUMERIC
keys and then press the
(PRINT)
key.
Call the HELP mode
“
H-013
”
.
Press the (STOP) key.
The HELP mode selection display will reappear.
Return to the HELP mode.
To Next Page
Loading...