Duplo DP-S510 - Page 231

230
c HELP Mode Function and Operation Procedures
chap.7
Adjusting/Checking the Horizontal Registration Section
2
Check operation.
HORIZONTAL REG. MOTOR / PAPER FEED RING LIFT SOLENOID
2
Checking sensors.
HORIZONTAL REGISTRATION CENTER SENSOR /
HORIZONTAL REGISTRATION ENCODER SENSOR
¡ Operation procedure
1.
3.
2.
4.
Check operation.
Enter
“
015
”
by the
NUMERIC
keys and then press the
(PRINT)
key.
Call the HELP mode
“
H-015
”
.
Check the following sensors.
Checking sensors.
Press the (STOP) key.
The HELP mode selection display will reappear.
Return to the HELP mode.