Duplo DP-S510 - Page 240

239
c HELP Mode Function and Operation Procedures
chap.7
Initializing HELP Contents (2 pages in total)
Page 1 : Check data.
2
Code by model/destination / Machine code / Manufacturing number
Page 2 :
2
Initialize HELP contents.
¡ Operation procedure
1.
Enter
“
027
”
by the
NUMERIC
keys and then press the
(PRINT)
key.
Call the HELP mode
“
H-027
”
.
2.
Check data. (Page 1)
Machine-specific codes and the manufacturing number are
displayed.
4.
3.
Initialize HELP contents. (Page 2)
Touch the arrow on the screen lower right in step
2
to display
the
INITIALIZE
screen on Page 2.
Press the (STOP) key.
The HELP mode selection display will reappear.
Return to the HELP mode.