272
c HELP Mode Function and Operation Procedures
chap.7
Factory Setting (H-063 - H-069)
2
Displaying the factory setting
¡ Operation procedure
1.
2.
HELP-063-069
are the settings for the printer's basic
functions. If they are changed, the printer may not
function properly. Therefore they must not be changed.
a
To exit the HELP mode
: Turn the power switch OFF.
a
To access another HELP mode
:
Enter the desired mode number
using the numeric keys.
Press the (STOP) key.
The HELP mode selection display will reappear.
Return to the HELP mode.
Enter
“
063
”
by the
NUMERIC
keys and then press the
(PRINT)
key. ( From HELP-064, also follow the same procedure.)
Call the HELP mode
“
H-063
” - “
H-069
”
.
To Next Page
Loading...
Need help?
General
