77
4
4
Other Functions
Touch "END".
Touch "END".
When you want to cancel the specifi ed area, touch
"CLEAR". The display changes as below.
If “ALL CL” is touched, all of the set area is
cleared.
If “BOX”or “POLYGON” is touched, the
specifi ed area is cleared.
If “PEN 1”, “PEN 2”, “PEN 3”, or “PEN 4” is
touched, the area you want to cancel is
cleared with the stylus pen.
Edit Function: Edit Image
5 Touch "INSIDE" or "OUTSIDE".
“INSIDE” is touched here.
If you touch “OUTSIDE”, the outside of the
specifi ed area is edited in the current mode.
(“Using AREA Function” → see p.81)
Touch "END".
"MAKE UP" is set.
Continue Page....
REFERENCE
ALL CL
POLYGON
BOX
PEN 1
PEN 2
PEN 3
PEN 4
To Next Page
Loading...
