Sew ing w ith the flap at t he right (production of trousers)
–
For the production of trousers always position the flap at the “Rear
positioning point” (light spot 5).
The “Rear positioning point” applies as a fixed point also for other
sewing units (further flap lengths).
–
Attach the positioning mark 4 for the hind trousers to the fabric
sliding sheet.
–
The sketch shows the positioning of a right hind trousers part 3
with flap.
–
Position the left hind trousers parts in reflected image.
The position of the flap remains unchanged.
34
4
5
3
4
To Next Page
Loading...
