With electronic needle thread monitor.
In order to generate a clean seam pattern, the sewing unit is equipped
with a multiple thread tension device, permitting to assign to various
thread pulling directions the according t ension value previously saved
in the sewing program.
The thread pulling device allows pulling the needle thread under the
sewing material during the first stitch.
The sewing unit is equipped with a programmable stitch counter for
the hook thread monitoring and a piece counter.
Integrated test and check program for service and maintenance
works. In addition to the monitoring of the sewing process, it is also
possible to check the motor functions, the inputs and outputs for the
reference switches, the valves and the feeding motors. The program
also serves for the adjustment of machine functions and the preparing
of sewing programs by the teach-in method.
Individual stitch parameter per stitch in order to control external units
like:
·
The stroke position of the presser foot, thread trimmer, thread
clamp,
·
Speed, thread tension etc.
The height of the stand can be adjusted with the telescoping feet from
a minimum work height of 760 mm to a maximum work height of 910
mm for stand-up working.
The foot pedal needed to operate the sewing unit can be shifted to
allow an ergonomic adaption to the operator.
4
To Next Page
Loading...
