7.11 Teach-in
With the sewing unit 911 it is possible to create freely defined seam
contours and to memorize them in the control unit. The contour data
are entered at the control panel.
Line not sewing
Via this menu item a line can be created that will not
be sewn.
Line sewing
Via this menu item a line can be created that will be sewn.
Circular arc
Via this menu item a circular arc can be created.
Param…
Via this menu item the parameters that correspond to
the line or the circular arc are entered.
Sewing speed (min = 500 .. max. = 3000 U/min)
Stitch length (min. = 0.1 max. = 12.7 mm)
51
1
To Next Page
Loading...
