1
1 Product Description
CNC-controlled sewing unit based on the class 867 with large sewing
area (sewing field size 300 x 200 mm) and a DAC III control unit with
special software.
For technical textiles manufacturers, motor vehicle equipment
manufacturers, seat manufacturers (automotive), bag, case and
backpack manufacturers (leather/textile), shoe manufacturers.
For the following applications:
Bartacks on load-bearing straps, lowering har nesses, safety
harnesses, lashing straps; Attaching of labels and facing pieces;
Decorative seams on shoes and legs of boots, decorative seams in
special applications.
Material:
Straps, ropes, leather, webbing, airbag materials, leather cut, foam
laminate, leather- laminate- and textile plastics
Double-lockstitch machine equipped with:
Automatic sewing foot and clamp lifting, sewing stroke adjustment,
thread trimmer, needle thread monitoring, thread pulling device and
multiple thread tension.
Technical specifications
The sewing unit is driven by a positioning drive.
With the control unit DACIII are operated apart from the sewing drive
also two step motors needed for the X and Y motions of the seam
geometry and a Z axis for the adjustment of the sewing foot.
The arm shaft of the sewing unit is directly driven by a brushless DC
motor.
·
Max. speed 3,000 U/min.
·
Stitch length up to 12.7 mm.
·
99 program memory locations are available.
·
The programs can be sewn individually or in sequences.
·
Motor driven sewing foot lifting.
·
Pneumatic driven clamp opening/closing.
·
The maximum size of the sewing field is 300 mm in X direction and
200 mm in Y direction.
·
Central oil wick lubricating for the machine head and the hook.
·
Equipped with a vertical hook
·
The BFT graphical control panel OP 7000 serves as control
element.
3
To Next Page
Loading...
